Data (DAT) Menu:
The Data menu controls the internal logging feature of the UV-100. The UV-100 can
store approximately 36 hours of readings. For long term data logging techniques see the
Application Examples section.
To begin logging, select LOG. You will be prompted to overwrite and data already
stored.
The UV-100 will now store all readings at 10 second intervals until internal memory is
filled. The data is retained even if the unit is powered down or unplugged so the UV-100
can be used remotely and returned to a computer for download.
END command stops storage of measurements. Data will be kept in memory until an
Overwrite command is given.
Output
To connect the UV-100 to the computer, refer to Connections To External Equipment
section.
To download, connect the UV-100 to a computer and select XMT. The UV-100 will
output all measurement records in memory in a comma delimited serial stream.
Output Examples:
Normal Mode:
0.00,298.4,575.8,09:34:38,27/05/2008
0.00,298.4,575.8,09:34:48,27/05/2008
0.04,298.4,575.7,09:34:58,27/05/2008
0.02,298.4,575.8,09:35:08,27/05/2008
0.03,298.4,575.8,09:35:18,27/05/2008
0.03,298.4,575.8,09:35:28,27/05/2008
0.03,298.4,575.8,09:35:38,27/05/2008
0.03,298.4,575.8,09:35:48,27/05/2008
0.03,298.4,575.8,09:35:58,27/05/2008
4
