Eco Pacific: Super Star Operating Instructions-2021/P.2
ECO PACIFIC High Efficiency GAS DUCTED HEATING UNIT-
Congratulations
for being a proud owner of a
‘
Super Sta
r’
standard high efficiency fast response
compact gas Ducted Heater.
Please read carefully so that you may be properly acquainted with the heater
’s features, operating
procedures, and the express Eco Pacific
warranty
. The company has endeavoured to include in
this extremely popular heater those features, which its market research suggests, will best meet
the needs of its customers. It includes a fail-safe Electronic Ignition which provides ignition only
when the unit requires it (no burning pilot flame).
Warning:
Do not
operate this appliance before reading the operating instructions.
Do not
place articles on or against this appliance.
Do not
store chemicals or flammable materials, or spray aerosols near this appliance.
Do not
operate with panels, covers or guards removed from this appliance.
Do not
operate this appliance if you smell gas around it.
Do not
enclose this appliance.
Servicing shall be carried out only by authorized personnel.
General:
The
‘
Super Star
’
is an Australian designed and manufactured high energy efficiency gas ducted
heater that provides a trouble-free fast response comfort in your home through an effective source
of heat. Before you start to enjoy your new heating system, we recommend that you familiarise
yourself with the operation of the system, so please read the instructions that follow. After that,
store these instructions in a safe place for future reference. If you have any concerns about your
new system, contact your installer or Eco Pacific Pty. Ltd., the manufacturers.
Electronic Ignition:
Your heater does not have a standing pilot, so does not waste energy. It is equipped with an
energy saving electronic ignition device which automatically lights the burner on demand when the
thermostat calls for heat.
Note: Do not manually light the burners with a match or other source of flame.
Operating Instructions:
Before proceeding with Step 1, make certain that the gas line has been purged at the heater prior
to turning the power on.
1. Turn gas valve to ON position.
2. Turn thermostat to OFF position.
3. Turn power ON at unit.
4. Turn thermostat to ON and raise the pre-set temperature higher than the room temperature.
Unit should fire up after 20 seconds followed by the room air supply fan after 20 sec. If the unit
does not ignite, please follow steps 5-6.
5. Turn thermostat OFF for 5 seconds.
6. Turn thermostat ON. Unit should ignite after 20 seconds. If the unit does not ignite, please
check the battery, and repeat steps 5-6, if still does not start, please call the installer, if newly
installed, or the service man from Eco Pacific on
Tel 03- 9706 6228.
Note:
The appliance communicates with the thermostat through the low voltage (24 volt)
connections. The installer is obligated to educate the user on how to operate the thermostat with
the normal sequence of the heater operation.
