40
X
X
X
X
X
4. Programming the switching times
After a remote component has been added, its time program can be set. The time program for automatic changing
between switching on and switching off can be separately programmed for each day of the week.
• Briefly press the ‘
x
’ button once.
• Use the scroller to select the remote switching component for which you wish to make a change.
• Briefly press the ‘
x
’ button once.
• Briefly press the ‘PROG’ button once.
• The following display appears:
Figure 30
• ‘S 1’ means ‘Schalter 1’ (switch 1), ‘S 2’ means ‘Schalter 2’ (switch 2), and so on.
• Using the scroller, select the day for which the time program should be set. You may either select each day of the
week individually or program a combination of days in one block for:
a) weekdays (Mon-Fri)
b) the weekend (Sat-Sun)
c) all days (Mon-Sun)
• After selecting the weekday/weekdays, confirm your selection by pressing the ‘PROG’ button.
• The display for the first on-time appears:
Figure 31
• Select the first on-time using the scroller. The curve progression on the lower part of the display follows your settings.
• Confirm the time by briefly pressing the ‘PROG’ button.
• The first off-time is now entered:
Figure 32
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
