V&T Technologies Co., Ltd.
http://www.ecodrivecn.com
Chapter 2 Inverter Installation
13
Fig.2
−
9 Removal of cover Fig.2
−
10 Mounting of cover
Mounting of operation panel
Please refer to 2.3.1 Removal and mounting of operation panel.
Note:
Do not directly mount the cover with operation panel on the inverter, otherwise, the operation panel will
have poor contact.
2.3.4 Open and Close of Doors of E5
−
H
−4T90G and
Above Power Class Inverter with
Sheet
−
metal Enclosure
Opening of the door
Press the latch following direction 1 in Fig.2
−
11 and open the door following direction 2.
Removal of operation panel
The operation panel is connected to the control board through the standard network cable and will not
interfere with the open/close of the door. To remove the operation panel, refer to section 2.3.1 Removal
and Mounting of Operation Panel
Mounting of cover
After the wiring operation of main circuit terminals and control circuit terminals is completed, close the
door following direction 1 in Fig.2
−
12, and then press down the latch following direction 2 to lock the
door.
Fig. 2
−
11 Opening the door Fig. 2
−
12 Closing the door
