Eco Air EPA-09CRN8, Owner'S Manual & Installation Manual, Page: 13 / 24

 Page 13 
Installation
Instructions
Accessories
Tools Needed
-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (optional, to shorten window adaptor for narrow windows)
North America
Name of Accessories
Qty.
Shape Name of Accessories
Qty.
Shape
1 pc Window Slider A Bolt
1 pc 1 set Unit Adaptor Security Bracket and 2 Screws
1 pc 1 pc Exhaust Hose Drain Hose
1 pc 1 pc Window Slider Adaptor Power Cord Buckle
O
N /O
F F
T E
M
P
S H O
R T
C U
T
T IM
E R
O
N
T IM
E R
O
F F
M
O D
E
FA N
S
LE E
P
S
W IN
G
LE
D
1 set(*) 1 pc Window Slider B
Remote Controller and Battery
(only for remote control models)
1 pc(*) Window Slider C
2 pc/4 pc(*)
1 pc/2 pc(*)
Foam Seal A (Adhesive)
2 pc Foam Seal B (Adhesive)
1 pc/2 pc(*)
Foam Seal C (Non-adhesive)
1 pc(*)
Drain Hose Adaptor
(only for heat pump mode)
1 pc(*)
1 pc(*)
Exhaust Hose Adaptor
Extended Exhaust Hose
NOTE: Items with (*) are on some models. Slight variations in design may occur.
What should I look for first when purchasing a portable air conditioner?
The right air conditioner helps you cool a room efficiently. An undersized unit won't cool adequately while
one that's too large will not remove enough humidity, leaving the air feeling damp. To find the proper air
conditioner, determine the square footage of the room you want to cool by multiplying the room length by
its width. You also need to know the air conditioner's BTU (British Thermal Unit) rating, which indicates the
amount of heat it can remove from a room. A higher
Why is the cooling capacity lower on newer models than on older units?
number means more cooling power for a larger room. (Be sure you are comparing only newer models to each
other- older models may appear to have a higher capacity, but are actually the same). Be sure to “size up” if
your portable air conditioner will be placed in a very sunny room, in a kitchen, or in a room with high ceilings.
After you’ve found the right cooling capacity or your room, you can look at other features.
Federal regulations require manufacturers to calculate cooling capacity based on a specific test procedure, which
was changed just this year. Models manufactured before 2017 were tested under a different procedure and
cooling capacity is measured differently than in prior years’models. So, while the BTUs may be lower, the actual
cooling capacity of the air conditioners has not changed.
What is SACC ?
SACC is the representative value of Seasonally Adjusted Cooling Capacity, in Btu/h, as determined in accordance
with the DOE test procedure at title 10 Code of Federal Regulations (CFR) 430, subpart B, appendix CC and
applicable sampling plans.
1 pc(*) Air exhaust passage
1 set(*) Window Sliders