ECM BB100, Instruction Manual, Page: 29 / 37

Safety Warnings
In installation and use of this product, comply with the National Electrical Code and any
other applicable Federal, State, or local safety codes.
Always wear eye protection when working near engines, vehicles, or machinery.
During installation, turn off the power and take all other necessary precautions to prevent
injury, property loss, and equipment damage. Do not apply power until all wiring is
completed.
Never work on a running engine.
When installing the BB100’s on a stopped engine, it is best to think-out your moves before
you make them.
Make certain the plumbing does not leak before testing the engine.
Vent the output gases from the BB100 away from people. The gases are exhaust and
poisonous.
Route and cable-tie all hoses and cables away from hot, moving, sharp, high energy (spark),
and caustic objects.
Take into consideration the movement of the engine, chassis, and wind buffeting when
instrumenting the engine.
Clear tools away from the engine before starting.
Operate the engine only in a well ventilated area and never when you or one of your co-
workers is tired.
When operating the BB100 in a vehicle, the operator should keep his or her eyes on the road.
One measure of professionalism is how much you and your co-workers can accomplish
without an injury. Always be at your professional best. Think and act with safety in mind.
Safety Warnings 25