ECM BB100, Instruction Manual, Page: 17 / 37

BBremote is a menu-driven program. The menu structure is shown below:
Menu Submenu Function
FILE Load Cal File From Disk Loads a calibration file from the PC
disk into BBremote.
Save Cal File to Disk Saves a calibration file from BBremote
to the PC disk.
Process Raw Data File Loads a raw data file (*.RAW) from
the PC disk, creates a final
downloadable
calibration file (*.BB), and saves the
processed calibration file on the PC disk.
Quit Exits BBremote.
SETUP Operating Mode Sets LPM, CFM, Liters Total, or Cubic
Feet Total on the BB100.
Display & Analog Output Sets Fast, Average, or Slow update rate
Update Rate for the BB100 display and analog
output.
Analog Output Range Sets the flow value which corresponds to
the high voltage condition of the analog
output on the BB100. For LPM and
CFM operating modes, this is the value
at 5.0 V. For the Liters Total and Cubic
ft. Total, this is the value at 4.5 V.
Flow Averaging Period Sets the value of the averaging period
for
flow calculations in the BB100.
Possible values are 0.1s, 0.2s, 0.5s, 1.0s,
2.0s, 5.0s, and 8.0s.
PC Comm Port Sets the PC communications port to
either COM1 or COM2.
COMMANDS Real-Time Flow Display On Starts real-time text display mode on the
PC. Values for all four of the BB100
operating modes are displayed.
Real-Time Flow Display Off Halts real-time text display mode on PC.
Clear Total Flow Value Clears the totalizer value in the BB100.
Download Cal File to BB100 Downloads a calibration file to the
BB100. The file must first be loaded
into BBremote using the FILE menu.
Upload Cal File from BB100 Uploads the current calibration file from
the BB100.
How to Use 13