background image

 

Warranty and Disclaimers 

 

 

WARRANTY 

 

The products described in this manual, with the exception of the lambda sensor, are 

warranted to be free from defects in material and workmanship for a period of one year from 

the date of shipment to the buyer.  Within the one year warranty period, we shall at our 

option replace such items or reimburse the customer the original price of such items which 

are returned to us with shipping charges prepaid and which are determined by us to be 

defective.  This warranty does not apply to any item which has been subjected to misuse, 

negligence or accident; or misapplied; or modified; or improperly installed. 
 

The lambda sensor is considered an expendable part and as such cannot be covered by a 

warranty. 
 

This warranty comprises the sole and entire warranty pertaining to the items provided 

hereunder.  Seller makes no other warranty, guarantee, or representation of any kind 

whatsoever.  All other warranties, including but not limited to merchantability and fitness for 

purpose, whether express, implied, or arising by operation of law, trade usage, or course of 

dealing are hereby disclaimed. 
 
The warranty is void if the control module is opened or the wiring harness is modified. 

 

 

LIMITATION OF REMEDY 

 

Seller’s liability arising from or in any way connected with the items sold and/or services 

provided shall be limited exclusively to repair or replacement of the items sold or refund of 

the purchase price paid by buyer, at seller's sole option.  In no event shall seller be liable for 

any incidental, consequential or special damages of any kind or nature whatsoever, including 

but not limited to lost profits arising from or in any way connected with items sold and/or 

services provided to buyer, whether alleged to arise from breach of contract, express or 

implied warranty, or in tort, including without limitation, negligence, failure to warn or strict 

liability.  In no event shall the company's liability to buyer arising out of or relating to the 

sale of any product or service exceed the purchase price paid by buyer to the company for 

such product or service. 
 

 

PRODUCT CHANGES 

 

We reserve the right to discontinue a particular product or to make technical design changes 

at any time without notice. 

 

 15 

Summary of Contents for AFM1040































Reviews: