background image

 

 

 

 

 

 

 

WC400 & WC800 

‘M’ Series Controller

 

 with 7 segment display

 

User Guide 

 

The “M” Series Roof Controller is an electronic switching unit that enhances the benefits you c

an enjoy from 

your Opening Roof.  The unique design ensures easy and convenient operation of your roof and will even 
memorise your preferred settings.  A key feature of the unit is a Rain Sensor that is mounted on the roof that 
will automatically close all roof banks when it starts to rain. 

 

 

Th

e “M” Series Roof Controller operates by use of the six buttons on the switch plate.  When the buttons are 

pushed individually, they operate the primary functions of the unit.  When two buttons are pressed together, 
additional secondary functions are operated. 

 

You will notice that the 7segment display, shows the bank number as you step through & operate each bank 
of louvres.

 

 

 

 

Summary of Contents for WC400 M Series

Page 1: ...s A key feature of the unit is a Rain Sensor that is mounted on the roof that will automatically close all roof banks when it starts to rain The M Series Roof Controller operates by use of the six buttons on the switch plate When the buttons are pushed individually they operate the primary functions of the unit When two buttons are pressed together additional secondary functions are operated You w...

Page 2: ...ce will turn OFF the rain protection system and the DP will go OFF Push the RAIN button again and the DP will come ON and it will be in rain protection mode once again When the rain protection system is ON the system is waiting until it rains When it starts to rain the raindrops falling onto the Rain Sensor which is mounted on the roof will cause all roof banks to close Once it stops raining and t...

Page 3: ...EN button 4 Press STEP to change the active roof to roof 2 3 4 etc 5 Press OPEN to get roof 2 3 4 to the desired position 6 Press AUTO then RAIN almost simultaneously Hold down the buttons If the controller has accepted this position the display will flash A for two seconds If not try steps 1 6 again You can test this by wetting the rain sensor plate manually allowing the roof to close in Rain mod...

Page 4: ...tion mode switched ON If rain is detected in this period the roof will close and only go through the start up sequence once the rain sensor has dried out If you have the Battery back up function in use your system will continue to work for several days without 240V mains power Please Note Power failures surges storms can damage electrical equipment Cleaning A build up of dirt or bird droppings may...

Reviews: