Features
WARNING:
Seat adjustments must not be made while seated on your
Powerchair.
All other adjustments should be carried out while seated in your Powerchair.
Footrest Adjustment
Length
Pull out connecting pin from the first hole in
the footrest slide tube.
Slide out the footrest tube and refit the
connecting pin in the appropriate hole when
the required length is reached.
Height
Pull out the connecting pin located at the back of the footrest
slide tube. Position the footrest at the required height. Three
heights available. Refit the connecting pin in the appropriate
hole and make sure the connecting pin protrudes through he
other side of the tube and is secure.
Arm Adjustment
Angle
Pull up on ends of armrests, which will flip back to allow easy transfer in and out
of your seat. Under your armrests you will find a bolt and lock nut that may be
adjusted up or down to alter the angle of your armrests.
Length
Located under the armrest controller, you will find a hand knob. Loose the knob
to extend or reset the controller bracket.
8
