Height
Below the armrest on the down supporting tube you will see a
button. Pull up on the button to raise or lower your armrest.
Width
Beneath the rear of the Powerchair seat you will locate two
hand knobs, one at each side of the seat. Release the hand
knobs and slide each armrest tube outward to desired width
and retighten hand knobs.
Seat Height Adjustment
Located on the main frame, the tube receiving the seat stem
has three height adjustment holes. By fitting of the steel bolt in
any one of the holes, three heights can be achieved.
Joystick Controller
Conversion
You can move the joy stock controller so the operator can use it with either their
left or right hand. Beneath the armrests there is a hand knob (same know to
adjust the armrests). Remove the hand knob completely and slide off the
armrests. You can now exchange the joystick control from one side to the other.
Extension or Retraction
Push the joystick controller outward and backward to store it at the side of the
Powerchair Arm. This allows easier access to tables, desks, etc.
9