Eclipse EC-P50, Installation Manual, Page: 29 / 52

P0016-LI-03.01 29
5. Expander Configuration
This section covers programming of the expander modules.
Expander Areas
Expanders must be assigned to one or more areas to ensure
correct operation of the system. The expander areas control the
following:
f When the system is exit mode only the expander in the areas
that are being armed will generate the exit tone.
f
When a lid tamper is activated from the expander, the
tamper alarm is generated for the area(s) assigned to
expander.
Locations:
5101
to
5104
Expander 1 to 4: Areas.
Entry Mode: Bit Toggle Selection (see page 17).
1 Area 1
On: The expander is assigned to area 1.
Off: The expander is not assigned to area 1.
2 Area 2
On: The expander is assigned to area 2.
Off: The expander is not assigned to area 2.
3 Area 3
On: The expander is assigned to area 3.
Off: The expander is not assigned to area 3.
4 Area 4
On: The expander is assigned to area 4.
Off: The expander is not assigned to area 4.
5 Area 5
On: The expander is assigned to area 5.
Off: The expander is not assigned to area 5.
Expander Options
This set of options controls how the selected expander tamper
and internal piezo sounder function.
Locations:
5111
to
5114
Expanders 1 to 4: Options.
Entry Mode: Bit Toggle Selection (see page 17).
1 Enable Tamper
On: The lid tamper on the selected expander is monitored.
Off: The lid tamper on the selected expander is not monitored.
2 Enable Piezo
On: The internal piezo sounder on the selected expander is
enabled.
Off: The internal piezo sounder on the selected expander is
disabled.
Expander Sounds
This set of options controls how the selected expander generates
sounds from its onboard piezo sounder and loudspeaker output.
Locations:
5121
to
5124
Expanders 1 to 4: Sounds.
Entry Mode: Bit Toggle Selection (see page 17).
1 Alarm Tones
On: The selected expander generates alarm tones.
Off: The selected expander will not generate alarm tones.
2 Trouble Tones
On: The selected expander generates trouble tones.
Off: The selected expander will not generate trouble tones.
3 Chime Tones
On: The selected expander generates chime tones.
Off: The selected expander will not generate chime tones.
4 Entry Tones
On: The selected expander generates entry tones.
Off: The selected expander will not generate entry tones.
5 Exit Tones
On: The selected expander generates exit tones.
Off: The selected expander will not generate exit tones.
6 Key Press Tones
On: Not supported on the expander.
Off: Not supported on the expander.
7 Advisory Tones
On: The selected expander generates advisory tones.
Off: The selected expander will not generate advisory tones.
8 Tamper Tones
On: The selected expander generates tamper alarm tones.
Off: The selected expander will not generate tamper alarm tones.
Expander Outputs
Both EC-EX10 and EC-EX10/O have 10 programmable outputs.
This set of options allows the output type (function) to be
assigned to each of the expander outputs.
Locations:
5201
to
5210
Expander 1: Output 1 to 10 Type.
5211
to
5220
Expander 2: Output 1 to 10 Type.
5221
to
5230
Expander 3: Output 1 to 10 Type.
5231
to
5240
Expander 4: Output 1 to 10 Type.
Entry Mode: Selection List (see page 16).
Enter the two digit group number followed by the two digit type
number, e.g., 0301 = “Zone 01 Alarm”. See page 31 for a
complete list of output functions.
Expander Output Attributes
This set of options allows the output attributes to be assigned to
each of the expander outputs.
Locations:
5301
to
5310
Expander 1: Output 1 to 10 attributes.
5311
to
5320
Expander 2: Output 1 to 10 attributes.
5321
to
5330
Expander 3: Output 1 to 10 attributes.
5331
to
5340
Expander 4: Output 1 to 10 attributes.
Entry Mode: Bit Toggle Selection (see page 17).
See page 30 for details on output attributes.