Eclipse CD8051 Owner'S Manual Download Page 61

Page: 61 / 108

How to use the NOB remote control

Turning the power on/off

When the power is turned on, the state used when the power
was turned off such as CD and tuner playing is restored.

1 .

Press the [PWR] button.

The power turns on or off each time the button is pressed.

When the main unit is shut down, the remote control will not
work.

Adjusting the audio volume

1 .

Press the [AUDIO CONTROL] button, and turn
it to the left or right.

Each press of the button will switch the audio control
modes.
Turn to the right: Increases the volume.
Turn to the left : Decreases the volume.

Cutting the volume instantly (muting):

Press the [MUTE] button for more than two seconds to cut
the volume or restore it instantly.

Press the [MUTE] button for more than two seconds if E-
COM is connected and less than two seconds if E-COM is
not connected to cut the volume or restore it instantly.

・

SCAN

REPEAT

RANDOM

FUNC

PWR

SCAN

RPT

RAND

LEVEL

CONT

REAR

LEFT MIN

FRONT

MAX RIGHT

5504

DISC

BAND

MODE

MUTE

ILLUMI

PWR

E-COM

TRACK

TUNE SEEK

・

SH-MOD

[PWR] button

[MUTE] button

Remote-control
light receptor

[AUDIO
CONTROL]
button

Summary of Contents for CD8051













































































































Search results

Summary of Contents for CD8051

Reviews:

Brands by name

Popular brands

Eclipse CD8051, Owner'S Manual

Search results

Summary of Contents for CD8051

Reviews:

Brands by name

Popular brands