manualshive.com logo in svg

Eclipse CD8051, Owner'S Manual

Share
Download
Eclipse CD8051 Owner'S Manual Download Page 18

[FUNC] button

Button [1]

ESN (Key CD) security operating procedure

18

• If there is a problem with the inserted CD, an [ERR]

message will appear for two seconds and the CD will be
ejected. Reinsert the ejected CD.

• If a CD causes the [ERR] message to appear twice in a

row, a [CHANGE] message will appear for two seconds.
Try another CD.

• The Security indicator will flash whenever the vehicle’s

ignition is switched off.

How to cancel the Key CD

1 .

Turn OFF the Power.

2 .

Press and hold button [1], then the [FUNC]
button, and hold both for more than one
second.

A [SEC] message appears, then in two seconds it will
change to [DISC]. 
The front panel opens; the CD8051 is now ready to
accept your Key CD in the CD slot.

3 .

Insert your Key CD into the slot.

The front panel closes.
A [CANCEL] message appears, the front panel opens,
then the Key CD is ejected.
The Key CD is cancelled.

Summary of Contents for CD8051













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands