Eclipse CD7000, Owner'S Manual

Page: 85 / 327

Making changes with Function Mode
85
XIV
The character will be inserted where
the cursor is flashing.
Right: Advances the cursor to the
right.
Left: Returns the cursor to the left.
Upper: Advances the character
forward in its type.
Lower: Moves the character backward
in its type.
[Symbol] Initial value [!]
!
l
"
l
#
l
$
l
%
l
&
l
‘
l
(
l
) l * l + l , l _ l . l / l : l ; l
<
l
=
l
>
l
?
l
@
l
‘
l
_
l
! l MMM
[Upper-case alphabet characters] Initial
value [A]
A
l
B
l
C
l MMM l
X
l
Y
l
Z
l
A l MMM
[Numeric characters] Initial value [1]
1
l
2
l
3
l MMM l
8
l
9
l
0
l
1 l MMM
ATTENTION
• To change the type of character to be
entered, repeat steps 3 and 5.
• A maximum of 16 characters may be
entered per title.
• 30 titles can be stored.
• If the number of discs that can be
memorized is exceeded, the information
about the disc whose playing time is oldest
is deleted.
Deleting station name/disc title
(Station Name/Title)
The station name/disc title that is
displayed at this point will be deleted.
Setting guide tone (Guide Tone)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
The guide tone setting mode is
activated.
The selected item will be highlighted.
Setting clock display (Clock ON/
OFF)
Switches the clock display to ON/OFF.
The clock display setting mode is
activated.
4
Press the [SELECT] (Right/Left)
button to select the position in
which to enter the character.
5
Press the [SELECT] (Upper/Lower)
button to select characters.
6
Press the [ENTER] button to store
the title.
7
Press the [CUSTOM] or [RTN]
button to exit function mode.
1
Press the [RTN] button for more
than two seconds, when title
setting mode is activated.
2
Press the [CUSTOM] or [RTN]
button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the Guide Tone.
2
Press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the guide tone ON/
OFF.
4
Press the [CUSTOM] or [RTN]
button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the Clock ON/OFF.
2
Press the [ENTER] button.