Eclipse CD5100, Owner'S Manual

Page: 49 / 259

How to operate the Sound Adjustment Mode
49
X
Each time the button is pressed, the Q
curve pattern changes as follows.
When the Bass is selected:
WIDE
↔
MidWIDE
↔
NORMAL
↔
NARROW
↔
WIDE
↔
When the MIDDLE is selected:
NORMAL
↔
NARROW
↔
NORMAL
↔
When the TREBLE is selected:
NORMAL (FIX)
Each time the button is pressed, the
frequency level changes as follows.
When the BASS is selected:
60Hz
↔
80Hz
↔
100Hz
↔
120Hz
↔
60Hz
↔
When the MIDDLE is selected:
700Hz (FIX)
When the TREBLE is selected:
7.5kHz
↔
10kHz
↔
12.5kHz
↔
15kHz
↔
7.5kHz
↔
ATTENTION
• Center frequencies and Q curves adjusted
here are reflected on BASS, MIDDLE and
TREBLE in the audio control mode. (Refer
to page 44 for details on audio control
operation.)
• When the center frequencies and Q curves
are adjusted, CUSTOM EQ will be updated.
Position selector
Acoustics can be simply adjusted to listening
position.
The Position Selector setting mode is
activated.
When each button is pressed, the
position changes as follows.
ENTER: OFF
UP: FRONT
DOWN: REAR
RIGHT: FRONT-RIGHT
LEFT: FRONT-LEFT
2 Press the [SELECT] (Upper/Lower)
button to adjust the Q curve
pattern.
3
Press the [SELECT] (Right/Left)
button to adjust the frequency
level.
4
Press the [CUSTOM/MENU] or
[RTN] button to exit sound
adjustment mode.
1 Press the [SELECT] (Upper/Lower)
button to select the Position
Selector.
2
Press the [ENTER] button.
3
Press the [ENTER] and [SELECT]
(Upper/Lower/Right/Left) button to
select the desired position.
4
Press the [CUSTOM/MENU] or
[RTN] button to exit sound
adjustment mode.