Eclipse AVN76D Owner'S Manual Download Page 127

Page: 127 / 215

125

Operation

125

Adjusting sound quality

You can set the sound quality and adjust the sound balance and the like.

When you switch to the Audio settings screen
from any of the Audio operations screens, the
following operations are available.

●

Adjusting audio balance

●

Adjusting woofer

●

Setting loudness

●

Setting source volume control

●

Adjusting sound quality

●

Touch

to return to the immediately

preceding screen.

You can adjust the forward and back, and left
and right balance.

●

To fine adjust, touch any of the balance
switches

change the corresponding value by 1.
When you touch and hold one of the
balance adjusting switches

, or

, the balance will continue

to change, but stop at the center value. To
continue to change the balance, touch one
of the balancing switches again.

●

Touch

to cancel the fader/

balance settings value and return to the
center values.

●

On completion, touch

to store the

setting and return to the immediately
preceding screen.

Display of Audio Settings
Screen

Touch

on any of the audio

operations screens.

Touch the switch you wish to set.

Sound

Done

Adjusting audio balance

Touch .

Touch the desired balance point.

BAL/FAD Setting

Center

Summary of Contents for AVN76D
























































































































































































































Search results

Summary of Contents for AVN76D

Reviews:

Related manuals for AVN76D

Brands by name

Popular brands

Eclipse AVN76D, Owner'S Manual

Search results

Summary of Contents for AVN76D

Reviews:

Related manuals for AVN76D

Brands by name

Popular brands