Switching Audio Control Modes
BASS
MID
TREB
BAL
FAD
NON-F
NF-P
LPF
LOUD
SVC
VOL
BASS
...
Turn the [VOL] rotary knob to the right or left in the audio mode while referring to the table below to adjust the
sound.
1
The modes will switch one step in the order shown below each time the [ENTER]
button is pressed.
Mode
Function
[VOL] rotary knob/Function
BASS
Adjusts bass level.
Turn to the right
Emphasizes low sounds.
Turn to the left
Softens low sounds.
MID (MIDDLE)
Adjusts middle level.
Turn to the right
Emphasizes mid range
sounds.
Turn to the left
Softens mid range
sounds.
TREB (TREBLE)
Adjusts treble level.
Turn to the right
Emphasizes high
sounds.
Turn to the left
Softens high sounds.
BAL (BALANCE)
Adjusts left/right
speaker balance
(BALANCE).
Turn to the right
Emphasizes right
speakers.
Turn to the left
Emphasizes left
speakers.
FAD (FADER)
Adjusts front/rear
speaker balance
(FADER).
Turn to the right
Emphasizes front
speakers.
Turn to the left
Emphasizes rear
speakers.
NON-F (NON-FADER
LEVEL)
Adjusts non-fader
level (for connected
sub-woofer).
Turn to the right
Increases the sub-woofer
level.
Turn to the left
Decreases the sub-
woofer level.
NF-P (NON-FADER
PHASE)
The merger of sound
between the front and
rear speakers and the
woofer can be
improved by selecting
the phase. Switch the
phase which lets the
speakers combine
without any
disharmony.
Turn to the right
NORMAL
(Makes the output timing
of the front/rear speakers
and the woofer the
same.)
Turn to the left
REVERSE
(Changes the phase of
the output timing of the
front/rear speakers and
the woofer.)
