background image

AGE RECOMMENDATION: NOT FOR CHILDREN UNDER 14 YEARS, THIS IS NOT A TOY.

As the user of this product, you are solely responsible for operating in a manner that does not 

endanger yourself and others or result in damage to the product or the property of others.
 

 Always keep a safe distance around your model to avoid collisions or injury. This model is 

controlled by a radio signal subject to interference from many sources outside your control. Inter-

ference can cause momentary loss of control.

 Always operate your model in open spaces away from full-size vehicles, traffic and people.

 Always follow the directions and warnings for this and any optional support equipment (chargers, 

rechargeable battery packs, etc.).

 Always avoid exposing the electronic parts of this model to water. Moisture causes damage to 

electronics.

▪ Never operate your model with weak transmitter batteries.

 Always keep you model in sight and under control.

 Always use fully charged batteries.

 Always keep transmitter powered on while vehicle is powered.

 Always remove batteries before disassembly.

 Always keep moving parts clean.

Introduction

Whether you’re a first timer or have years of experience as an RC boating enthusiast, the Rage 

RC Eclipse 650 sailboat is the ideal sailboat for you.  The Eclipse 650 hull is blow-molded from 

ABS for added durability and the attractive pre-applied trim design gives it the look of a full-size 

sailboat when you’re sailing your local lake or pond.  For convenience, the Eclipse 650 arrives 

pre-assembled with the sails partially pre-rigged to help make getting on the water fast and easy.  

Plus, it’s the ideal size to fit in either the back seat or trunk of your car for heading to your local 

body of fresh water.  For performance, the Eclipse 650 includes a 17g “drum-style” winch servo 

that provides power and smoother, more scale-like operation than traditional servos.

The Eclipse 650 is a RTR boat, so everything you need to get started is included in the box - 

including a 2.4GHz interference-free radio system, a “drum style” sail winch servo, and pre-printed 

rip-stop nylon sails that provide durability and performance. The Eclipse 650 even includes the 8 AA 

batteries needed for operation - 4 for the transmitter and 4 to power the servos, plus an easy to 

assemble display stand to show off your new sailboat when you're not out sailing.

Summary of Contents for 650

















Reviews: