Eclipse Veri-Flame Single Burner Monitoring System, Model 5600, V1, Installation Guide 818, 1/15/2015
5
Product Description
The Eclipse Veri-Flame Single Burner Monitoring System
controls the start-up sequence and monitors the flame of
single gas, oil, or combination gas/oil burners. There are
three different models of the Veri-Flame line: no purge,
purge and modulation models. Each model features field
selectable trial for ignition (TFI). Each model is also
available for use with three types of flame sensor:
ultraviolet (UV), self-check UV and flame rod
Required components are the Veri-Flame, matching
wiring base and a flame sensor. Optional components
include a remote display and cable, tester, and various
scanner accessories.
The Veri-Flame No Purge and Purge models are available
in three different series - 5602, 5603 and 5605. The 5602
Series is UL listed for the USA and Canada and FM
approved; the 5605 Series is UL listed and FM approved.
The 5603 Series is for 240 VAC applications and is FM
approved.
The Veri-Flame Modulation model is available in two
different series: 5602 and 5603. Both series are capable
of modulation (high purging and low fire start). The 5602
Series is UL recognized for the USA and Canada and FM
approved. The 5603 Series is for 240 VAC and is FM
approved.
Audience
This manual has been written for people who are already
familiar with all aspects of a nozzle-mix burner and its add-
on components, also referred to as “the burner system”.
These aspects are:
• Design / Selection
• Use
• Maintenance
The audience is expected to have previous experience
with this type of equipment.
Figure 1.1 Veri-Flame Single Burner Monitoring
System (Purge Unit Shown)
Veri-Flame Documents
Installation Guide 818
• This document
Datasheet 818
• Required to complete design and selection
Spare Parts List Series 818
• Recommended replacement part information
Related Documents
• EFE 825 (Combustion Engineering Guide)
• Eclipse Bulletins and Info Guides: 684, 710, 732,
756, 760, 902, 930
1
Introduction
