3
1 Introduction
1.1 Range of application
The Micromag HP/50NPT follows on from the standard Micromag family and has all the same
incredible benefits. The unit was developed to suit high pressure/temperature applications.
Micromag HP/50NPT can be installed anywhere in the fluid delivery system and can remove
sub-micron magnetic and para-magnetic particles.
For further information relating to the standard benefits and operation please refer to the
downloadable Micromag brochure on our website –
www.eclipsemagnetics.com/na
in
the ‘Magnetic Filtration’ section.
The filter is not to be used with a corrosive or aggressive medium unless it is specified at the
time of order and the vessel is supplied with a suitable barrier coating i.e. PTFE.
Pressure rating
– Standard filter is designed and tested to operate at 725 psi (50 bar) max.
line pressure.
DO NOT USE IN EXPLOSIVE ATMOSPHERE UNLESS
ORDERED AS AN ATEX APPROVED PRODUCT!
1.2 Used symbols
Important notes
Danger notes
Safety notes
Contents
1 Introduction
1.1 Range of application
3
1.2 Used symbols
3
1.3 Overview
4
2 Technical data
2.1 Performance data
5
2.2 Noise data sheet
5
3 Design and method of operation
3.1 Method of operation
6
3.2 Construction
6
4 Safety
4.1 Intended use
7
4.2 General preventive measures
7
4.3 Dangers of not adhering to safety notes
7
4.4 Safety notes for operation and maintenance
7
4.5 Notes on residual risks
8
4.6 Consequences with arbitrary change
8
4.7 Prohibited operation
8
5 Installation and use
5.1 Mechanical installation
9
5.2 Connections
9
5.3 Setting of the operating parameter
9
5.4 Cleaning
10
6 Maintenance
6.1 General notes
10
7 Spare parts/service
7.1 Spare parts list
11
7.2 Service address
11
8 Shipping, preservation, waste
disposal, transport, storage
8.1 Shipping, preservation, waste disposal
12
8.2 Transport
14
8.3 Storage
15