EC-PM-530D User's Manual
- 7 -
2.6 Installing the Driver
Please use the cable to connect computer with printer, then turn on the computer and the printer, put
the driver CD into the CD-ROM. Install driver by the following ways:
2.6.1 Auto-installing Way (Recommended)
Double click the file "Setup.exe" in the driver disc, install driver by the prompt.
Figure 2-8 Installing the ribbon cartridge
Note: 1. When your print becomes faint, you need to replace the ribbon cartridge.
Otherwise, the print quality will be affected and the print head may be damaged.
2. To remove the old ribbon cartridge, firstly, make sure the power is turned off, then
as the above figure shown, hold the ribbon cartridge with your thumb and middle
finger, and then lift up the left side of the ribbon cartridge, and then take out the
ribbon cartridge. Install a new one as the above steps.
3. Please use the
original ribbon cartridge only. Manufacturer will not honor
warranty when using unauthorized ribbon cartridge.
4. Please turn the ribbon knob in the direction as the arrow shown.
Caution: Don’t move the print head when the printer is powered on, or else, it may damage
the printer. Moreover, don’t touch the print head if the printer has just been used as
the print head may be hot.
Note: Auto-install way needs the operating systems of Windows 2000 and above and the
operating systems of Window 98/ME and below are not supported.
Ribbon Cartridge
Ribbon Knob
Rear Cover
Front Cover
Power Switch
Cover-open Button
Ribbon Core