EN
31
Installation
6.2.3
Attaching the seal
A
➤
Lay the sealing silicone around the holes and the openings to prevent
water from entering inside the cabin (fig.
5
, page 5).
6.2.4
Installing the unit on the cab
➤
Place the unit on the roof so that the holes match (fig.
6
, page 5).
➤
Fasten the unit with the six screws M8 (fig.
6
1, page 5) with twelve
washers (fig.
6
2, page 5) and the six self-locking nut M8 (fig.
6
3,
page 5).
A
➤
Tighten the screws with a torque of 8 Nm.
➤
Fasten the condensate drain hose (fig.
7
1, page 6) to the system.
➤
Align the condensate drain hose by turning so that the condensation
can drain.
NOTICE!
Ensure that the adhesive surface for the seal between the unit and the
cab roof is clean (free of dust, oil, etc.).
NOTICE!
Do not exceed the specified torque under any circumstances. This is the
only way to ensure that the thread inserts are not torn out.
Pataca
Fresc
Summary of Contents for Pataca Fresc HVAC
