USER MANUAL
– C100HD
Page
3
of
18
INMANUUIN165 Rev.2019.04.01 / ENG
1. SYMBOLS
Warning
EU Authorized
Representative
Read the related documentation.
This side up
Alternate current
Fuse
Applicable part type BF
Video output
Protective Earth (Ground)
Freeze image
Equipotential bonding
Video camera
Manufacturer Information (Name,
Address)
White balance
Serial Number
Lighting
Date of Manufacture (MM/AAAA)
CE mark
Do not look straight to the light
source
Temperature limits
Do not disassemble
Pressure Limits
Do not discard with the household
waste
Humidity Limits
Fragile
Keep dry and protected
from moisture
2. SAFETY INFORMATION
2.1 WARNINGS
In order to avoid electrical shock, this device should only be connected to a grounded
outlet
Do not install the device near sources of heat such as heating
The HD VIDEO COLPOSCOPE should be used in offices where the electrical installation
is grounded pursuant to the relevant rulings for health facilities
The HD VIDEO COLPOSCOPE should be connected to the mains electricity through the
cord supplied or a replacement of same with the same certifications.
The mains electricity outlet should be grounded and no adaptor should be used.
The sectionalizing of the electricity should be performed with an electrical switch that
meets the IEC 61058-1 standard, the guaranteed sectionalizing should be performed
either disconnecting the console’s power cable or removing the coupler from the outlet.
The device is grounded with a ground conductor on the power supply cord. The ground
connection is essential for the safe operation of the device.
The device is connected to an equipotential bond through a ground terminal on the power
supply cable. This grounding is essential for the safe operation of the device.
Do not connect the device to visualization devices that do not meet the standard
IEC60601-1.