7
PACKAGE CONTENTS
•
1 x HDMI 4x1 4K Presentation Switcher
•
2 x Mounting Ears
•
4 x Rubber feet
•
1 x 5-pin Euroblock connector
•
1 x RS-232 cable (DB9 to 3-pin Euroblock)
•
1 x Wireless Antenna
•
1 x 24VDC/5A International Power Supply
•
1 x Quick start and Warranty sheet
PANEL DESCRIPTION
6.1. Front Panel
1.
Power LED Indicator:
The LED illuminates red when power is applied.
2.
Input Status LED indicators:
The LED illuminates orange when video signal is
detected on the corresponding input channel and it will be off when there is no
signal. It will illuminates green when the video signal is chosen as input source.
3.
AUTO LED:
The LED illuminates green when the switcher is in auto-switching
mode, and it will be off when exit the auto-switching mode.
4.
SELECT AUTO/3s:
Press the button to select input source, or press and hold it at
least 3 seconds to enable auto-switching mode. Please refer to the
chapter for more details about switch rules.
5.
DISPLAY ON:
Press the button to send CEC Display On command in order to turn
on the display. Note that the RS232 command needs to be set by user.
If an exception occurs at the VEOCast input, press and hold the button at least 3
seconds to reset it.
6.
DISPLAY OFF:
Press the button to send Display Off command to turn off the
display. Note that the RS232 command needs to be set by user.
7.
EDID: 4-pn DIP Switch
for EDID Settings (Please refer to chapter
EDID Settings
for more details)
8.
FW: Micro
USB port for firmware upgrade.
1
2
3
4
5
6
7
8
