11
6.2
Mains Connection
HADA operates on alternating voltages from 90 to 264V and 47 to 63Hz
. This device is
equipped with an oversized power supply capable of adapting
without any type of adjustment
to the mains voltage of any country in the world.
On the
rear panel
, there is an
on/off switch
for the unit.
In the
front panel
there is the
button ON
with its LED indicator that
illuminates when the unit
is in operation.
To enter in standby mode,
press and hold the ON button until all LEDs on the front panel
blink once. The prot. LED (red) will illuminate together with the ON LED (white) to indicate that
standby mode is active.
To exit standby mode,
repeat the process.
Do not allow the mains cable to run parallel to the shielded cables
carrying the audio
signal, as this may cause humming.
