Ecler GENIO, User Manual, Page: 8 / 18

8
INPUT SIGNALS (RX):
 RX : RJ45 input for connection to remote equipment via CAT5 cable or higher.
(maximum distance 300m).
 RX A/B OUT : direct outputs of the signals received in the RX port, with Euroblock
connectors.
8. CABLE CONNECTIONS
It is recommended to make all audio connections with devices off or on stand-by,
whether input devices such as audio sources or devices connected to the mixer outputs
such as power amplifiers.
8.1. Audio input connections
GENIO has the following audio inputs, with the following types of connection:
 INPUT 1 and 2 : balanced mono signal, with 3-pin female XLR con ST jack
(combo connector) and with Euroblock connector. Control of the input sensitivity
of the signal by means of the SENS switch (0, -20, -40 dB).
o
COMBO connector:
3. Combo con Euroblock
XLR/ Jack TRS/ Euroblock
-
Live or direct signal > Terminal 2 / Tip / +
-
Cold or inverted signal > Terminal 3 / Centre ring / -
-
Ground > Terminal 1 / Base /
⊥