Ecler GENIO, User Manual, Page: 10 / 18

10
 RX : RJ45 connector for the reception of the signal sent from the TX port of another
remote GENIO unit, by means of a CAT5 cable or higher. It also receives remote
power in case of activation of the REMOTE POWER switch in the remote TX unit.
8.2. Output Audio Connections
GENIO has the following audio outputs, with the following types of connection:
 OUT A and B : main output. Balanced stereo or mono line signals, with Euroblock
connector on the rear panel. Depending on the position of the SRC and MODE
switches, the output will be configured in the following ways:
POSITION
SWITCHES
OUTPUT CONFIGURATION
(OUT A/B = TX A/B)
SRC = IN 1 – IN 2
MODE = ST
OUT A = IN 1
OUT B = IN 2
SRC = IN 1 – IN 2
MODE = MONO
OUT A = IN 1 + IN 2
OUT B = IN 1 + IN 2
SRC = IN 3 – IN 4
MODE = ST
OUT A = IN 3
OUT B = IN 4
SRC = IN 3 – IN 4
MODE = MONO
OUT A = IN 3 + 4
OUT B = IN 3 + 4
SRC = ALL
MODE = ST / MONO
OUT A = IN 1 + IN 2
OUT B = IN 3 + IN 4
 TX : a copy of outputs A and B is delivered to the RJ45 connector to send the
signal to another remote GENIO unit via a CAT5 cable or higher. It also sends the
remote power in case of activation of the REMOTE POWER switch.
 RX A / B : Audio outputs connected directly to the A and B signals received on the
RX port from a remote TX unit, with Euroblock connectors.