8
Wall installation
procedure:
1.
Drill three 6 mm holes in the wall, matching the position of the holes in the bracket.
2.
Insert three 6 mm wall plugs into them.
3.
Fasten the safety sling on the speaker using the provided screw and hook up the
sling’s carabiner-ended side a to a secure anchor point.
4.
Place the bracket in place, previously passing the speaker line and speaker wire
through the square hole in the bracket. Attach the bracket to the wall. Connect the
speaker cable to the connector on the back of the box using the supplied Euroblock
connector. Pay attention to the correct polarity of the terminals and that the cable
passes through the square-shaped hole in the bracket. It is recommended that the
supplied protective cover be fitted when the speaker is installed outdoors.
5.
Place the speaker in its final position by sliding it vertically downward so that the
guide on its back side matches the guide on the bracket.
6.
Hold the safety wire at the back of the speaker so that the speaker does not
accidentally fall and cause damage to property and/or personnel.
7.
Orient the loudspeaker to the desired position on the vertical and horizontal axes.
Tighten the Allen screws on the bracket to fix this position on both axes.
8.
Set the power selector to the desired position.