Ecler eMOTUS8OD, User Manual, Page: 7 / 11

7
WARNING!: eMOTUS8OD is supplied as standard with the switch in the 100V/60W
position. If you accidentally connect the system to a low impedance amplifier, it will
not cause any damage to the loudspeaker but it will perform well below its
performance. If you accidentally connect the loudspeaker to a 100V network with the
switch in a 8Ω
 position, it will be severely damaged.
7. LOCATION, ASSEMBLY AND START-UP
On the packaging of the eMOTU8OD you will find everything you need to complete the
installation of the unit.
The following general rules shall be observed:

Always install the unit on solid and firm surfaces.
 For good sound reproduction there must be no obstacle between the speakers
and the audience.
 Adapt the sound pressure levels to the needs of reproduction.
On the packaging of the eMOTUS8D you will find everything you need to complete the
installation of the two units:
 Two articulated wall mounting brackets
 5mm Allen key
 Two metal security cords (slings) against possible detachments, with their
corresponding screws and fixing washers.

Two two-terminal Euroblock connectors
 8 adhesive feet for tabletop placement
 Quick User Guide
 Warranty Card