background image

 

 

9.

 

Do not defeat the safety purpose of the polarized or grounding type plug. A 
polarized plug has two blades with one wider than the other. A grounding 

type plug has two blades and a third grounding prong. The  wide blade or 

the third prong are provided for your safety. If the provided plug does not 

fit  into  your  outlet,  consult  an  electrician  for  replacement  of  the  obsolete 
outlet. 

10.

 

Protect the power cord from being walked on or pinched particularly at the 

plugs,  convenience  receptacles,  and  at  the  point  where  they  exit  from  the 

apparatus. 

11.

 

Only use attachments/accessories specified by the manufacturer. 

12.

 

Unplug  the  apparatus  during  lightening  sorts  or  when  unused  for  long 

periods of time. 

13.

 

Refer  all  servicing  to  qualified  personnel.  Servicing  is  required  when  the 

apparatus has been damaged in any way, such as power supply cord or plug 
is damaged, liquid has been spilled or objects have fallen into the apparatus, 
the  apparatus  has  been  exposed  to  rain  or  moisture,  does  not  operate 

normally, or has been dropped.

 

14.

 

Disconnecting  from  mains:  Switching  off  the  POWER  switch  all  the 
functions  and  light  indicators  of  the  amplifier  will  be  stopped,  but  fully 

disconnecting  the  device  from  mains  is  done  unplugging  the  power  cord 

from the mains input socket. For this reason, it always shall remain readily 

operable. 

15.

 

Equipment  is  connected  to  a  socket-outlet  with  earthing  connection  by 

means of a power cord. 

16.

 

The marking information is located at the bottom of apparatus. 

17.

 

The  apparatus  shall  not  be  exposed  to  dripping  or  splashing  and  that  no 
objects filled with liquids, such as vases, shall be placed on apparatus. 

 

NOTE:

 This equipment has been tested and found to comply with the limits for a Class 

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide  reasonable  protection  against  harmful  interference  when  the  equipment  is 
operated  in  a  commercial  environment.  This  equipment  generates,  uses,  and  can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction  manual,  may  cause  harmful  interference  to  radio  communications. 
Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful 
interference in which case the user will be required to correct the interference at his 
own expense.  

 

WARNING:

 

This product must not be discarded, under any circumstance, 

as  unsorted  urban  waste.  Take  to  the  nearest  electrical  and  electronic 
waste treatment centre. 

 

NEEC  AUDIO  BARCELONA,  S.L. 

accepts  no  liability  for  any  damage  that  may  be 

caused  to  people,  animal  or  objects  due  to  failure  to  comply  with  the  warnings 
above. 

Summary of Contents for eHSA SERIES














Reviews: