Ecler edrive 600, User Manual

Page: 18 / 72

18
Routing
• Knob A: Output source, selectable; Input A, Input B or Sum A+B
Configures the routing from input to output. This function is only available in mono format
Presets.
Utilities
Utility functions
Three utility functions are provided to adjust screen contrast, the display units used for parametric
equalisation bandwidth and switch between stereo and mono mode.
The device automatically adjusts for the variations in display contrast as the temperature of the
LCD changes. The screen contrast utility control sets the base contrast of the screen and also allows
optimization for a given viewing angle.
Parametric equalisation width parameters can be di splayed in either ‘Q’ or bandwidth, expressed
in octaves.
Care should be taken when swapping between mono and stereo mode as the parameter set for
the left hand channels will be copied to the right hand side, overwriting those settings. This is not
reversible and could represent quite a significant and potentially damaging change to the processing.