9
The special combinations of the setup keys are:
Left and right MENU simultaneously for 2 seconds: access to the unit's SETUP menu (see
chapter 9)
Left and right PARAM simultaneously for 2 seconds: access to the unit's front panel
locking/unlocking and password management (see chapter 10)
SHIFT + left MENU (EXIT): return to the main screen, from any menu
SHIFT + right MENU (CANCEL): undo the last parameter editing and recall the value as
before the change
SHIFT + left PARAM (RECALL): load one of the presets (device setup) stored in the memory
SHIFT + right PARAM (SAVE/ENTER):
o
SAVE: save a preset (device setup) into memory
o
ENTER: confirm a critical modification (e.g.: password change)
Right MENU, kept pressed while powering up the unit: load preset #1, designed to be edited
and saved to be used as booting setup. This operation is allowed even when the unit's front
panel is locked with a password
SHIFT hold down and maintained while powering up the unit: displays the "
Power OFF to
recover factory defaults
" message. After turning off and on again, default parameters (
factory
defaults)
are restored, erasing all the user data, settings and presets in the unit's memory
SP/CLIP indicator light
The front panel LEDs indicates two types of information:
Green light or SIGNAL PRESENT (SP): warn of the presence of signal at the mixer inputs.
These indicators illuminate when the input signal exceeds -40dBV.
Orange light or CLIP: They light up when the signal is near the real clipping (saturation) level,
+12dBV. You must take care that these indicators do not remain continuously lit.