3
11. To reduce risk of electric shock, unplug charger from outlet before attempting any cleaning.
Removing the battery pack will not reduce this risk.
12. Never attempt to connect 2 chargers together.
13. DO NOT store or use the tool in locations where the temperature may reach or exceed 105°F (such
as outside sheds or metal buildings in summer).
14. The charger is designed to operate on standard household electrical power (230volts). Do not
attempt to use it on any other voltage!
●
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY
The battery is not fully charged when you first receive it. First read the safety instructions below
the follow charging notes and procedures.
READ ALL INSTRUCTIONS CAREFULLY AND KEEP IN A SAFE PLACE FOR FUTURE
REFERENCE.
1. Do not incinerate the battery even if it is severely damaged or is completely worn out. The battery
can explode in a fire.
2. A small leakage of liquid from the battery cells may occur under extreme usage or temperature
conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage
gets on your skin:
a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar.
c. If battery liquid gets in your eyes, flush them with clean water for a minimum of minutes and
seek immediate medical attention.(medical notes: the liquid is 25-35% solution of potassium
hydroxide.)
3. Do not connect the positive pole and the negative pole of the battery with any metal objects. Battery
could be short circuited causing damage to the battery and possibly causing severe burns or fire.
4. Charge the battery only in the chargers supplied with the product.
5.
NOTE: the battery in your tool is the lithium-ion type, with no self-discharge or memory
effect.
●
ASSEMBLY
1
，
Fitting/removing the wheels assembly(see Fig. 1)
Fitting the wheels assembly (1):
Insert wheel frame (1) into handle shell, and tighten frame knob (2).
Removing the wheels assembly (1):
Loosen frame knob (2), and take out wheel frame (1).
WARNING: Do not turn on the switch when you fit or remove the wheels assembly. This can cause a
serious injury.
