13
Fig 2
Adjusting the extension pole length:
Release the extension pole knob by turning it anti-clockwise. Place one hand on one pole
section and the other hand on the other section. Pull the pole sections together to shorten the
overall length or pull apart to lengthen. See Figure 19 below;
Fig 19
NOTE:
Extend the telescopic pole only to the length required to reach the hedges and branches being
trimmed. Do not extend the handle above waist height. When the desired length is achieved, tighten the
Extension pole knob screw.
NOTE:
Adjust hand placement on the telescopic pole grip or additional handle to achieve proper balance.
Do this in combination with using the shoulder strap as described previously. Do not attempt to use the pole
hedge trimmer or branch lopper at a length which does not allow you to achieve proper footing and balance
at all times.
Fitting Either The Hedge Trimmer Or Chainsaw Motor Heads:
Connect the motor’s pole connection collar into the extension pole connection collar until you hear of the
locking sound “Cluck”. Check both parts are locked together by trying to pull them apart. See Figure 3
below. (Note: The motor head Locking Hole should be on the same side with the extension pole Lock Catch).
