10
1.
Shoulder Strap
2.
Strap Connector
3.
Main Handle
4.
Throttle Control Locking Button
5.
On/Off Switch
6.
Power Cord (10m supplied with UK specifications)
7. Plug (European plug illustrated. Fused BS Approved Plug Supplied)
8. Extension Pole Locking Hexagon Screw (tighten with Hex key (included)) – in some cases
instead of the hex key a hand tightening knob is provided for convenience
9. Hedge Trimmer Head Locking Knobs
10. Hedge Trimmer Head Angle Adjust Button
11. Hedge Trimmer Blade Guard
12. Hedge Trimmer Blade
13. Branch Lopper Chain
14. Branch Lopper Blade
15. SDS (Branch Lopper Blade And Chain Tension) Control Knob
16. Branch Lopper Blade Cover
17. Branch Lopper Angle Adjust Button
18. Branch Lopper Head Pole Connection Locking Knob Holes
19. Branch Lopper Blade Guard
20. Telescopic Pole
21. Branch Lopper Motor
22. Hedge Trimmer Motor
VI
. Assembly
Unpacking
This product requires assembly.
Carefully remove the product from the box.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the
product.
BEFORE ASSEMBLY Firstly unpack and check all parts have been supplied. If you think any parts are
missing, first check the packaging again before calling the Eckman helpline on 0844 441 3011.
WARNING:
If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to
heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this product. Any
such alteration or modification is misuse and could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
