KGL Operating Manual – UA 412 S
2019-01-14
/
47 122
ON = Master / Slave mode ON
OFF = Master / Slave mode OFF
6.5 Power supply
Warning about dangerous electrical voltage!
Danger of electric shock! BEFORE connection and disconnection it must be checked that the 230 V
AC power supply cable is
!
disconnected from the power supply
The power supply cable is connected to the case controller on the top right terminal block PE/L/N.
The case controller can now be supplied with power. If power is being received, the active lamp (LIFE LED)
flashes for approximately 10 seconds after switching on. The CAN bus LED flashes if the case controller is
also connected to the CAN bus. See chapter
for more details about the status LEDs.
6.5.1 Status LEDs
Warning about dangerous electrical voltage! Danger of electric shock! The device must never be
operated without its case. Before opening the case, the device must be disconnected from the power
supply.
