KGL Operating Manual – UA 412 S
2019-01-14
/
106 122
9.2.5 Menu 4 Messages
MELDUNGEN POS:
XXXXX
1 view
Continue to menu 4-1 Display log memory
2 acknowledge
The messages in the log memory are acknowledged; alarms acknowledged according to display: back using ESC
3 delete
Continue to menu 4-3 Delete log memory (with confirmation)
Menu 4-1 Messages Display
MELDUNGEN POS: XXXXX
Error text 1:
Error text of fault 1
/yy hh:mm ON
Start of the fault 1
/yy hh:mm OFF
End of the fault 1 (only if fault 1 is ended)
...
Error text n:
Error text of fault n
/yy hh:mm ON
Start of the fault n
/yy hh:mm OFF
End of the fault n (only if fault n is ended)
Menu 4-2 Acknowledge Messages
Message
is shown on the display.
Alarms acknowledged!
Menu 4-3 Delete Messages
MELDUNGEN POS: XXXXX
Input
Delete!
Are you sure?
No: ESC
Yes:
Confirmation prompt for deletion of messages;
after acknowledgement display.
back with ESC
, ESC
9.2.6 Menu 5 Archive
ARCHIV POS: XXXXX
/yy hh:mm
Time of the archiving of data set 1
Zone 1: abcdefx °C
Status and temperature of Zone 1, see remark *)
Zone 2: abcdefx °C
Status and temperature of Zone 2, see remark *)
...
/yy hh:mm
Time of the archiving of data set n
Zone 1: abcdefx °C
Status and temperature of Zone 1, see remark *)
Zone 2: abcdefx °C
Status and temperature of Zone 2, see remark *)
*) The status abcdef contains the following states of the refrigeration point. If a state is not active, a "-
" is entered here. Example: Zone 1: abcdefx °C
Single-zone operation or BT 300 operator interface
a
B = Operation
b
K = Cooling
