<
ECHOWELL SF-1000/SF-2000/SF-3000
-E 9-
HEART RATE FUNCTION
DESCRIPTIONS
1.Start /Stop heart rate measure function
1. Hold
MODE
2 seconds to start
heart rate measurement function.
2. When the function is operating,
the LCD will display the signal as
follow:
3. Hold
MODE
2 seconds to
stop heart rate measurement function.
4. If a signal is not received for 5 minutes, the function will turn off
automatically.
2. Start/Stop heart rate data record function
1. Hold
MODE
2 seconds to start heart rate measure function.
2. Press
MODE
to change to
function.
3. Press
ST/SP
, the signal shown as ” ” at the left of the
display will change to “
“, it means the data record function is
started. Stop by pressing
ST/SP
, the signal will change to “
“.
4.
,
TIN
,
EXT*
,
AVG**
,
MAX**
,
CAL*
―
these functions will
work only while the record function is start.
5.
CAL*
mode will be calculated when the heart rate is equal or
over 90 bpm.
*
SF-3000 only
**
available on SF-2000 and SF-3000
3. Reset heart rate record
data
1. Press
MODE
to change to
mode.
2. Hold
ST/SP
2 seconds to reset the record data.
4. Heart rate display
descriptions
Range of heart rate measurement is from 40 bpm to 240 bpm.
5. Stopwatch mode
1
e hold MODE 2 seconds
Any tim
1. Stopwatch will auto calculate when heart rate data record
function start.
2. The range of
is from 00H00M00S to 99H59M59S.
