Pulsports-100/200
Pulsports-100/200
E12- -E13
11.
Ft.los mode (Just For Opal/Ruby 200 Only)
1. Calculates the weight of fat lost during exercise.
FT.LOS
2. The actual weight of fat lost from exercise can be important, and it
is a valuable reference of weight loss.
3. The range of fat loss is from 0 to 9999.99 g.
12
. Maximum mode
1. Monitors and records the maximum heart rate during exercise.
MAX
2. The range of maximum heart rate is from 40 to 240 bpm.
13.
In target zone time mode
1. Calculates and records the exercise time within the target zone.
IN.TM
2. The range is from 00H00M00S to 99H59M59S.
14.
Above target zone mode
1. Calculates and records the exercise time NOT in the target zone.
OVR.TM
2. The range is from 00H00M00S to 99H59M59S.
15.
User date mode (Just For Opal/Ruby 200 Only)
1. Enters the data for sexuality, age, weight and height of user.
USER
2. Personal data is an important reference for calculating the
consumption of calories.
3. Range of age from 5 to 99.
4.
Unit of weight: kg from 10 to 199
lb from 10 to 499
6.
a). Press P.MODE to select “
USER
” mode.
User data setting:
b). Press SET for 2 seconds to enter user date setting mode.
c). Press P.MODE to change setting mode.
d). Press T.MODE or ST/SP to change Sexuality: male or female.
e). Press T.MODE or ST/SP to change Weight Unit: kg or lb.
f). Refer the
Data Setting Processes
Fig. E) USER DATA SETTING
to adjust the User data.
(Refer Fig .E)
16.
Average mode
1. Calculating the average heart rate during exercise. According to
this value we can know if the cardiopulmonary condition has
been improved while do the same intensity of exercise.
AVG
2. Range of average from 40 bpm to 240 bpm.
precautions
1. Take care of you chest belt. Wash the chest belt by suds, then flush
out with water. Let it dry it naturally, avoiding putting the chest belt
under the environment of high temperature or touching the corrosive
as strong acid or alkalis material.
2. Wetting the skin, where will contact the conductive area of the chest
belt will improve the conduction and get more stable signal.
3.
The physical condition of individual might effect the intensity of
measured signal.
4. Avoiding using the heart rate monitor close to trolley car, tram stop,
transformer, electric substation and high-tension distribution line etc.
Because the radio signal will be affected under the environment as
high voltage and strong magnetic field.
5. Although the water resist of this watch has been approved as 30
meter, but please do not operate any button of the watch under
water. This watch is not designed for diving.
6. Battery can be used for 1 year according to daily use for 2 hours.
Please change the battery by watch shop, and do not break the
watch down by your own.
SPECIFICATIONS
OPAL/RUBY 100/200 Pulse Transmitter:
•
Battery type: CR2032
•
Battery life: Average 1300 hours.
(You can change the battery by yourself.)
•
Operating temperature: -10
°
C~50
°
C (14
°
F~122
°
F)
OPAL/RUBY100/200 Pulse Wrist Receiver:
•
Battery type: CR2025
•
Battery life: About 1 year.
•
Operating temperature: -10
°
C~50
°
C (14
°
F~122
°
F)
•
Water resistance: 3 ATM
