Pulsports T-301
Pulsports T-301
E4
1. Fasten the fastener at one end, put the chest belt on your chest
and loosen the stretch band.
(Fig. 1, 2 and 3)
2. Adjust the length of the stretch band until you feel conformable,
but the stretch band must cling to the chest; then fasten the
fastener at the other end.
(Fig. 4)
3. Adjust the sensor to the center of your chest and be sure the
backside of the sensor is clings to your chest and touches the
skin.
(Fig. 5. 6)
4. The chest belt has to be worn while using the heart rate
function. The distance transmission should be less than 1
meter (3 feet).
5. Do not bend or fold the chest belt to preventing damage.
(Fig. 7)
KEY OPERATIONS
Basic key operations
SET
- Hold 2 seconds to enter data setting mode.
T.MODE
- Change watch function group.
E.MODE
- Change pulse function group.
ST/SP
- Start/Stop
LAMP
- EL Light (light 3 seconds for each press).
BEEP
- Hold 2 seconds to on/off chime and key beep.
LAP
- Record Lap data.
LAP_RECALL
- Record Lap data review.
Data setting key operations
SET
- Press to quit data setting.
T.MODE
- Press to increase the value.
- Hold to increase the value automatically.
E.MODE
- Press to change the setting value.
ST/SP
- Press to decrease the value.
- Hold to decrease the value automatically.
