Pulsports T-301
Pulsports T-301
E12
5. Newest Design: Change Display for BPM and %HR
1. When heart rate measure
function starts, you can press
T.MODE
and
E.MODE
simultaneous
to
change
display position of
“
BPM
” and
“
%HR
” Digital intensity to fit
your need.
2. When the function is operating, the LCD will display: like above.
6. Target zone mode
T-Z
Setup the target zone by entering the percentage of maximum
heart rate. Maximum heart rate based on the data you input.
1. Press ST/SP to change to next target zone set.
2. “ ” and “ ” will not display when the heart rate within the
target zone. (No Beep sound).
3
. “ ” will display when the heart rate is
below
the lower limit of
the target zone. (Beep should sound).
4
. “ ” will display while the heart rate is
above
the upper limit of
target zone. (Beep should sound).
5.
Trget zone setting:
a). Press E.MODE to change to “
T-Z
” mode.
b). Press SET 2 seconds to enter target zone setting mode.
c). Press T.MODE or ST/SP to select how many sets target
zone you want.
d). Refer the
Data Setting Processes
to adjust the Target zone
data
(Refer Fig .D)
.
FIG. D) TARGET ZONE SETTING
