background image

Page 12

A

BOUT

 O

VER

-

THE

-A

IR

 TV B

ROADCASTS

Over-the-air TV signals are broadcast by local TV stations from a 
transmitter tower, and are received using an indoor or outdoor antenna. 
Digital over-the-air TV broadcasting uses advanced technology to 
deliver superb picture quality and CD-quality sound. However, digital 
over-the-air reception depends on several factors:

• The distance between the broadcast station and your home—the 

farther away the station, the weaker the signal.

• The broadcast station’s power—the lower the power, the weaker 

the signal.

• Obstacles between the station and your home, such as mountains, 

buildings, trees, or other objects—these may block or reflect the 
signal before it reaches you.

• Multiple broadcast stations—to receive good signals from several 

stations, you may need to compromise how the antenna is 
pointed, or you may need more than one antenna.

There is no guarantee of reception of digital over-the-air channels by 
using the OTA Module; however, using the best over-the-air antenna for 
your area will improve your chances of reception:

• You can typically receive a limited number of channels using a 

rabbit ears-type antenna, or a much larger number using a UHF/
VHF outdoor antenna.

• The higher the quality of antenna you use, the greater its range 

and the better its reception will be.

• Refer to www.antennaweb.org, a website run by the Consumer 

Electronics Association, for recommendations for antenna types 
and pointing directions.

OTA Module.book  Page 12  Thursday, July 3, 2008  4:35 PM

Summary of Contents for Over-the-Air Module MT2



















Reviews: