background image

Page 14

Limited Warranty

This Limited Warranty is a legal document. Keep it in a safe place. Remember to keep 
your Sales Receipt for warranty service. We will consider any items you return without a 
copy of the Proof of Purchase to be out of warranty.
This warranty extends only to the original user ("you," "your") of the DISH Network 
Over-the-Air Module and is limited to the purchase price of the module. DISH Network 
Corporation and its affiliated companies ("we," "our," "us") warrant this module against 
defects in materials or workmanship as follows. For one year from the original date of 
purchase, if we find the module is defective subject to the limits of this warranty, we will 
replace the module at no charge for parts or labor. We warrant any such work done against 
defects in materials or workmanship for the remaining part of the original warranty period.
This warranty does not cover installation of the DISH Network System; consumer 
instruction; physical set up or adjustment of any consumer electronic equipment; remote 
control batteries; signal reception problems; loss of use of the equipment; unused 
programming charges due to equipment malfunction; cosmetic damage; damage due to 
lightning, electrical or telephone line surges, fire, flood, or other acts of Nature; accident; 
misuse; abuse; repair or alteration by other than our factory service; negligence; 
commercial or institutional use; improper or neglected maintenance; equipment sold AS 
IS or WITH ALL FAULTS; equipment removal or reinstallation; shipping damage if the 
equipment was not packed and shipped in the manner we prescribe; nor equipment 
purchased, serviced, or operated outside the contiguous United States of America. 
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR 
EXCLUSIVE REMEDY. WE SHALL NOT BE HELD LIABLE FOR ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY 
EXPRESSED OR IMPLIED WARRANTY ON THIS DEVICE, NOR FOR ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGE RESULTING FROM THE USE OF, 
OR INABILITY TO USE, THIS DEVICE. UNDER NO CIRCUMSTANCES SHALL 
OUR LIABILITY, IF ANY, EXCEED THE PURCHASE PRICE PAID FOR THIS 
DEVICE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY 
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE ON THIS DEVICE IS LIMITED IN DURATION TO THE 
DURATION OF THIS WARRANTY. WE RESERVE THE RIGHT TO REFUSE TO 
HONOR THIS WARRANTY IF WE DETERMINE ANY OF THE ABOVE 
EXCEPTIONS TO HAVE CAUSED THIS DEVICE NOT TO HAVE PERFORMED 
PROPERLY. THIS WARRANTY SHALL BE VOID IF ANY FACTORY-APPLIED 
IDENTIFICATION MARK, INCLUDING BUT NOT LIMITED TO SERIAL OR 

OTA Module.book  Page 14  Thursday, July 3, 2008  4:35 PM

Summary of Contents for MT2 OTA



















Reviews: