EchoStar HUGHES inmarsat 9502, User Manual

Page: 70 / 77

70
Chapter 6 • AT unsolicited response codes
3500834-0001 Revision C
Code Text Explanation
FTP Management
20 FTP hookup fail Connection to FTP server failed. Problem could be server
unreachable or specified IP address or server name invalid, or
connectivity failure.
21 FTP login fail FTP username or password incorrect
22 FTP 'type' fail Could not establish “binary” mode.
23 FTP 'cwd' fail Could not change to working directory on FTP server.
24 FTP data connection fail Could not establish an FTP data connection with the server.
25 FTP 'nlst' fail Could not get list of files in current FTP server directory. Directory
may be empty.
26 FTP xfer command fail Could not initiate data transfer on an established connection. May
be caused if filename not found.
27 FTP found no filename Could not find a filename in the current server directory.
28 FTP local file read/write fail Error while writing downloaded file to UT flash or reading upload file
data.
29 FTP socket fail Error while reading or writing FTP data socket.
30 FTP completion error Error while closing the current FTP connection.
31 FTP xfer timed out FTP client timed out waiting for socket ready (read or write), e.g. due
to loss of connectivity during transfer.
_IGETFW
40 File in use, cannot download The file to be downloaded is the same (by name) as the image
currently in use.
41 Starting immediate update… Normal success. File downloaded successfully, now starting
immediate update.
42 Complete File listed in the response successfully downloaded to the UT
43 Downgrade disallowed Downgrade to lower release blocked to protect hardware
_IUPDFW
50 New firmware file not found Could not find filename specified in upgraded control file
51 New firmware file corrupt Firmware file failed checksum test.
52 New firmware file failure The new firmware failed to run or failed to acquire the network and
the unit fell back to the old release.
53 Upgrade admin file error Problem with local file manipulation during upgrade process
54 Upgrade status file error Problem with local file manipulation during upgrade process
_IGETFILE
60 Can't overwrite protected file File specified in AT command was ‘config.txt’, ‘config.chk’,
‘config_bk.txt’, ‘config_bk.chk’
_IUPDCFG
70 Can't use reserved file Attempt to use one of protected config files as the new config.txt
file.