EchoStar HUGHES inmarsat 9502, User Manual

Page: 28 / 77

28
Chapter 2 • Configuration via Web UI
3500834-0001 Revision C
DHCP Automatic Contexts: This option allows you to set up the UT for dynamic
ACA. This means that any device connected to the UT via DHCP , will automatically
receive a standard context.
To activate this feature, select “On” or “Data” from the drop down list under DHCP
Automatic Contexts section. The APN will be the default APN configured on the
Manage APNs page.
Figure 14: DHCP Automatic Contexts
Once you hit “Apply” you will get a pop -up message saying that the ACA settings
were updated successfully and to take effect you will have to reboot the terminal.
Once you reboot the terminal, check that the settings took effect.
To see if the context has been setup properly, click on the Connections tab> Manage
Connections Page and this will show you all contexts that have been setup (active or
inactive).