EchoStar DVR-5000 HDD Viaccess User Manual Download Page 63

Page: 63 / 96

Maintenance

Section 6

Digital Satellite Receiver

Page 6 - 7

001

hoS

tar

Inte

rnati

nal

orat

hts

erved

END OF LIFE DISPOSAL

Your receiver and related accessories contain materials which can be recycled and reused.
Specialized companies can recycle your equipment to increase the amount of reusable
materials and to minimize the amount of materials to be disposed of.

Please inform yourself on local regulations on disposal of your equipment.

6. Enter the required settings.

7. Read the available help text for information.

8. Monitor the signal indicator and make sure that

you have sufficient signal strength and quality.

9. Go to the Store Settings field.

10. On the RCU:

a. press the OK key to store the settings;

b. press the white key to end the procedure;

c. press the EXIT key to return to live video.

Summary of Contents for DVR-5000 HDD Viaccess




























































































Search results

Summary of Contents for DVR-5000 HDD Viaccess

Reviews:

EchoStar DVR-5000 HDD Viaccess, User Manual, Page: 63 / 96

Search results

Summary of Contents for DVR-5000 HDD Viaccess

Reviews: