EchoStar DVR-5000 HDD Viaccess, User Manual, Page: 18 / 96

Section 4
Familiarization
Page 4 - 2 EchoStar DVR-5000
©
2
001
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
rig
hts
re
s
erved
1.2. THE RECEIVER REAR PANEL
The rear panel gives you various connections to connect the audio and video equipment as
well as a terrestrial and dish antennas. Depending on the installation setup, you may not use
all connectors, but they are provided for any desired setup in future.
The available connectors on the rear panel are:
■ The VCR connector (SCART), for the
connection of a VCR with the use of a
fully-featured SCART-cable;
■ The VIDEO connector (RCA),
for the connection to the composite
video input of the TV (monitor);
■ The TV connector (SCART),
for the connection of a TV with the use of
a fully-featured SCART-cable.
■ The S/PDIF connector (RCA),
for the connection of Dolby Digital (AC-3)
compatible audio equipment;
■ The ANT IN connector (IEC),
for the connection of an terrestrial TV
antenna;
■ The SERIAL PORT connector (sub-D),
for the connection to the serial
communication port of a PC;
■ The TV OUT connector (IEC),
for the connection to the antenna
connector of a TV or a VCR;
■ The LNB IN connector (F-type),
for the connection of a dish to the
receiver, to receive the digital
broadcasts;
■ The AUDIO L connector (RCA),
for the connection of the left audio input
channel of a stereo set;
■ The IF OUT connector (F-type), for a
loop through connection;
■ The AUDIO R connector (RCA),
for the connection of the right audio input
channel of a stereo set;