Section 6
Maintenance
Page 6 - 4
EchoNAV 2.2
© 2
0
02 E
choS
tar
Inte
rnati
onal
C
o
rp
orat
io
n
A
ll ri
gh
ts
re
se
rv
ed
F
OR
D
I
SE
Q
C1.2
CONFIGURATIONS
FOR DIGITAL RECEIVERS
7. In the Frequency field, on the RCU, use the
numeric keys to enter the transponder frequency;
8. In the Polarity field, select H for Horizontal or V for
Vertical.
9. In the Symbol rate field, enter with the numeric
keys the symbol rate.
FOR ALL RECEIVERS
10. Leave the value Auto for Video PID, Audio PID and
PCR PID.
11. Go to the Continue field.
12. On the RCU, press the OK key to advance.
13. If the dish is not aimed at the satellite, the search
cannot be completed. When the popup message
‘No channels found’ shows, press OK and continue
with step 14..
14. On the RCU:
a. press the MENU key;
b. the
key to select the
menu;
c. the OK key, to select the
menu.
15. Select for the Search Mode: Update.
16. When in the Position field:
a. press and hold the
or
key and watch the
signal indicator for an indication;
b. in the signal indicator, make sure a network
name is shown;
c. press the
key to select another transponder
for signal verification;
d. press the
key to select the Position field;
e. use the
key to fine tune for the best signal
level and quality;
f. press the OK key, note that the saved position
of the satellite is shown.
17. Go to the Search channels field.
18. On the RCU, press the OK key to advance.
