EchoStar DSB-880 2Ci, User Manual, Page: 13 / 38

User Manual
Familiarization
Section 2
S/W Version 1.0 Page 2 - 3
© 2
003 E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll ri
g
h
ts
re
s
e
rv
ed
English
2
2.1.2. MOTORIZED
D
I
SE
Q
C1.2
G
O
T
O
X
2.1.3. SYSTEM SETUP
S
EARCH CHANNELS
NOTE
Some options might not be supported by your DiSEqC1.2 motor. Please refer to the
user guide of the motor for further details.
■
DiSEqC on To select the DiSEqC1.2 option for motorized installations.
■
DiSEqC off To select the DiSEqC1.0 option for fixed installations.
■
Limits on To select the dish movement limits option by software.
■
Limits off To delete the dish movement limits.
■
Move dish To move the dish and find the defined SAT.
■
Fine tune To move the dish for best signal level and quality.
■
Set East limit To set the East limit by software.
■
Set West limit To set the West limit by software.
■
Go to reference
If you want to reset your DiSEqC1.2 motor, you can re-calibrate
the position of the motor with the command: Go to reference.
Allow the motor some time to re-calibrate.
■
Recalculate position If a DiSEqC1.2 motor is out of position, you can recalculate the
position of all programmed satellites with the command:
Recalculate position. Allow the dish some time to recalculate
the SAT positions.
■
My latitude To set the latitude for the installation site of the dish.
■
North/South To select the hemisphere for the installation site of the dish.
■
My longitude To set the longitude for the installation site of the dish.
■
East/West To select the hemisphere for the installation site of the dish.
■
Set East limit To set the East limit by software.
■
Set West limit To set the West limit by software.
■
GoTo X To select the GoTo X option for DiSEqC1.2 installations.
■
SAT To define the satellite you want to search channels on.
■
LNB To select the LNB that you want to use for the selected SAT.
■
TP To select a transponder, from the internal database, of the
defined SAT. If the signal indicator shows low levels, select
another TP that gives a better signal.
■
Position
(DiSEqC1.2 only)
Shows the database number of the satellite.
■
Search mode To select Auto (all), TP or Network to search for channels.
■
Channel type To search for All channels, only FTA or only Scrambled
channels.
■
Channel To search for All channels, only TV, only Radio or only Data
channels.
■
Move dish
(DiSEqC1.2 only)
To move the dish and find the defined SAT.
■
Fine tune
(DiSEqC1.2 only)
To move the dish for best signal level and quality.
■
Search channels Search channels does a channel search on the defined SAT.
■
Signal level To indicate that you receive a signal (signal strength).
■
Signal quality To indicate that you have lock onto the selected TP (signal-to-
noise ratio).